Yep, we may get a tiny thank-you (read: commission) when you buy through
links on Gadgetspotr — not enough for a yacht, but enough to keep the lights (and
servers) on.
Learn more
35
Highlights
57
Differences
9
Reactions
0
Likes
Sovol SV01 Pro
vs
Creality Ender-3:
35 Highlights & 57 Differences —
So, Which 3D Printer Actually Works Better
Setup and operation are key here. Sovol SV01 Pro is beginner-friendly; Ender-3 needs some initial learning but is widely supported.
Gadget showdown: Sovol SV01 Pro vs Creality Ender-3 — see how they match up in performance, features, and depth, height, package weight & build-to-printer size ratio.
Sovol SV01 Pro vs Creality Ender-3: A Detailed 3D Printer Comparison
Both the Sovol SV01 Pro and Creality Ender-3 are prominent FDM/FFF 3D printers designed for consumer and educational use, emphasizing versatility and quality for a variety of printing projects. They share core functionalities such as open Cartesian frame structures, support for common 3D model formats including STL and G-code, and CE safety certification. However, they diverge significantly in aspects like build volume, noise levels, and feature sets, which impact which user might prefer each model. The Sovol SV01 Pro caters to those seeking a larger build footprint with quieter operation and a more advanced interface, while the Ender-3 appeals to budget-conscious users prioritizing speed and upgradeability.
Expansive Build and Quiet Precision: Highlights of the Sovol SV01 Pro
The Sovol SV01 Pro takes a commanding stance in print size capability with an impressive build volume of 1230.45 inch³, significantly surpassing the Ender-3's 738.4 inch³. This larger printable area is complemented by a spacious bed with dimensions of 11.02 inches in width by 9.45 inches in depth, making it ideal for bigger or multi-part projects.
In addition to size, the SV01 Pro invests in user convenience by offering filament auto-loading, a feature absent in the Ender-3, helping reduce manual preparation and potential loading errors. The display technology also sets this model apart, featuring a larger and crisper 4.3-inch screen with a resolution of 128x64 pixels, offering clearer navigation and better user experience compared to the smaller 2.8-inch display on the Ender-3.
Noise-sensitive environments will benefit from the SV01 Pro's quieter operation, boasting an idle noise level of just 30 dB, substantially lower than the Ender-3's 50 dB. Even though the SV01 Pro has a coarser minimum layer resolution of 100 microns, it maintains a high print accuracy and finishes prints like the calibration Benchy slightly faster (85 minutes vs 90 minutes).
Powering this robust platform is an internal power supply delivering 350 W, supporting a wide voltage range and stable operation under various humidity levels. However, it's worth noting that the printer is heavier at 21.6 lbs with a slightly larger footprint, so users should ensure enough space availability.
Efficiency Meets Economy: What the Creality Ender-3 Brings to the Table
The Creality Ender-3 remains a top choice for cost-effective 3D printing. Its compact design benefits from a higher build-to-printer size ratio of 26.83, indicating efficient use of physical space despite a smaller absolute build volume. This translates to easier placement on desks or workbenches with less dedicated room (roughly 2 square feet).
Speed is an undeniable strength here. The Ender-3 offers a measured effective print speed of 60 mm/s and an official maximum speed reaching 180 mm/s. Such capability caters to users who value quicker job completion. Additionally, the printer is lighter and more portable at 15.21 lbs and offers an external power supply providing 270 W of power consumption.
The Ender-3 also boasts a wider range of upgrade options like multi-material printing, CNC compatibility, enclosure add-ons, and camera integration, and importantly, it has reliable spare parts availability. This extensive aftermarket support translates to easier maintenance and customization potential for tinkerers and professionals alike.
Though its smaller 2.8-inch display lacks resolution details, the Ender-3 supports firmware updates and multiple popular file formats. Safety-wise, it holds CE, FCC, and RoHS certifications, ensuring adherence to quality standards, although it does not feature sensors like those in the SV01 Pro. The relatively higher noise level (50 dB) may affect use in quiet environments.
Quick Take
The Sovol SV01 Pro excels at delivering larger print volumes and a noticeably quieter printing experience, enhanced by its intuitive, high-resolution screen and filament auto-loading. The Creality Ender-3, meanwhile, shines with its faster print speeds, affordability, and a thriving ecosystem of upgrades and spare parts, making it a versatile and budget-friendly option.
Bottom Line
If your priority is printing larger objects with less noise and a more user-friendly interface, and you have the budget to invest about $439.67 at Amazon, the Sovol SV01 Pro is undoubtedly the better fit. However, if upfront cost and upgrade flexibility are key concerns, and you prefer a printer that can grow with your projects, the Creality Ender-3, priced as low as $168.99 at Creality Store, has the edge with its faster printing and broader compatibility with aftermarket enhancements.
Verdict
Winner: Sovol SV01 Pro; For its spacious build volume, quieter operation, and superior user interface that suits professionals and serious hobbyists seeking precision and convenience.
Runner-up: Creality Ender-3; Thanks to its rapid printing speeds, cost efficiency, and extensive upgrade options, it remains a favorite among beginners and budget-minded users.
Side by side. The numbers. The features. No drama.
Is Sovol SV01 Pro better than Creality Ender-3? It depends on your needs. Our gadget breakdown lays out the full story — from specs to buyer feedback.
Sovol SV01 Pro and Creality Ender-3 both utilize FDM/FFF printer technology, suitable for layered extrusion 3D printing. This makes either machine a solid choice for those seeking standard fused filament fabrication printers.
Defines the printing technology used by the machine.
In the battle of Printer Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Printer Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
The warranty period for both Sovol SV01 Pro and Creality Ender-3 is 1 year, providing equal coverage duration for users. Both options offer standard warranty terms, making them comparable in terms of customer support and protection.
Coverage period offered by the manufacturer.
In the battle of Warranty Period,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Warranty Period on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Product Name
What is the product name?
0
Sovol SV01 Pro
0Votes
Sovol SV01 Pro
0
Creality Ender-3
0Votes
Creality Ender-3
Sovol SV01 Pro
The product is officially named Sovol SV01 Pro.
The commercial name of the 3D printer.
In the battle of Product Name,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Product Name on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Intended Use
What is the intended use?
0
Sovol SV01 Pro
0Votes
Consumer, Professional, Educational
0
Creality Ender-3
0Votes
Consumer, Educational
vs
Intended Use
Sovol SV01 Pro targets Consumer, Professional, and Educational users, whereas Creality Ender-3 is aimed at Consumer and Educational users only. This broader intended use makes Sovol SV01 Pro more versatile for professional applications.
Identifies the main user category.
In the battle of Intended Use,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Intended Use on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Supported Applications
What applications are supported?
0
Sovol SV01 Pro
0Votes
Prototyping, Miniatures, Engineering
This printer is well-suited for a variety of applications including Prototyping, creating Miniatures, and Engineering functional parts. Its versatility makes it useful for both hobbyists and educational settings.
Lists the most common applications supported.
In the battle of Supported Applications,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Applications on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Assembly Type
What is the assembly type?
0
Sovol SV01 Pro
0Votes
Prebuilt
0
Creality Ender-3
0Votes
Kit
Creality Ender-3
The printer is categorized as a Kit for assembly type. This means some user assembly is required before the printer can be used.
Shows whether the printer is sold as a kit requiring assembly or fully prebuilt.
In the battle of Assembly Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Assembly Required
Is assembly required?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
Assembly is required, indicating some setup steps must be done by the user before printing.
States if the printer requires assembly.
In the battle of Assembly Required,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Required on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Upgrade Path
Does it support an upgrade path?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
An upgrade path means users can enhance the printer with additional features or modules over time.
Whether the printer can be expanded with official or third-party upgrades.
In the battle of Upgrade Path,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Upgrade Path on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Country of Origin
What is the country of origin?
0
Sovol SV01 Pro
0Votes
China
0
Creality Ender-3
0Votes
China
vs
Country of Origin
Both Sovol SV01 Pro and Creality Ender-3 are manufactured in China, indicating similar origin in production. This commonality may influence aspects like availability and support infrastructure equivalently for buyers.
The country where the product is designed or manufactured.
In the battle of Country of Origin,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Country of Origin on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Model Number
What is the model number?
0
Sovol SV01 Pro
0Votes
SV01 Pro
0
Creality Ender-3
0Votes
Ender-3
Manufacturer’s reference code for precise identification.
In the battle of Model Number,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Model Number on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Release Year
What is the release year?
0
Sovol SV01 Pro
0Votes
2022
0
Creality Ender-3
0Votes
2018
vs
Release Year
The Sovol SV01 Pro was released more recently in 2022 compared to the Creality Ender-3's 2018 release. The newer release year of Sovol may imply more updated features and design improvements relative to Ender-3.
The year the 3D printer was first released.
In the battle of Release Year,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Release Year on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Target User Level
What is the target user level?
0
Sovol SV01 Pro
0Votes
Beginner, Intermediate
0
Creality Ender-3
0Votes
Beginner, Intermediate
Indicates the recommended skill level.
In the battle of Target User Level,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Target User Level on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Sovol SV01 Pro stands at 12.6 inches in height, which is considerably shorter than Creality Ender-3's 18.31 inches. The more compact Sovol can fit better on crowded desks or shelves.
The total external height of the printer.
In the battle of Height,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
5.7 inch
measurement.
Based on community votes for Height,
Sovol SV01 Pro ◉ earned
0 votes,
less than
Creality Ender-3 ◉,
which got 1 votes.
The Sovol SV01 Pro package weight is 28.41 lbs, significantly heavier than the Creality Ender-3's 17.64 lbs. This heavier package might affect shipping cost and handling, suggesting the Ender-3 is more portable for transport.
total shipping weight including packaging.
In the battle of Package Weight,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
10.8 lbs
measurement.
Based on community votes for Package Weight,
Sovol SV01 Pro ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
Sovol SV01 Pro has a build-to-printer size ratio of 24.3%, slightly less than Creality Ender-3's 26.83%. This means the Ender-3 offers a marginally better utilization of its printer size for build volume, favoring compact efficiency.
The efficiency ratio of build volume relative to the overall printer size.
In the battle of Build-to-Printer Size Ratio,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
2.5 %
measurement.
Don’t keep it to yourself — be the first to react and review the
Build-to-Printer Size Ratio on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Width
What is the printer’s width?
11.81
inch
0Votes
17.32
inch
0Votes
Sovol SV01 Pro
The width measures 11.81 inch which is approximately 29.99 cm.
The total external width of the printer.
In the battle of Width,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
5.5 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Width on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Package Width
What is the package width?
22.4
inch
0Votes
18.9
inch
0Votes
Sovol SV01 Pro
Package width is 22.4 inches, about 56.9 cm wide.
Width of the printer’s packaging.
In the battle of Package Width,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
3.5 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Width on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Package Depth
What is the package depth?
22
inch
0Votes
18.9
inch
0Votes
Sovol SV01 Pro
Package depth is 22 inches, equivalent to roughly 55.88 cm.
Depth of the printer’s packaging.
In the battle of Package Depth,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
3.1 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Depth on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Package Height
What is the package height?
9.1
inch
0Votes
9.84
inch
0Votes
Sovol SV01 Pro
Package height is 9.1 inch, which converts to approximately 23.11 cm.
Height of the printer’s packaging.
In the battle of Package Height,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
0.7 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Height on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Space Requirement
What is the space requirement?
2.85
sq ft
0Votes
2
sq ft
0Votes
vs
Space Requirement
Sovol SV01 Pro requires about 2.85 sq ft of space compared to Creality Ender-3's 2 sq ft, indicating the Sovol needs around 0.85 sq ft more area. Thus, Creality Ender-3 is preferable if desk or workshop space is limited.
The minimum flat surface area needed to safely place the printer.
In the battle of Space Requirement,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
0.9 sq ft
measurement.
Don’t keep it to yourself — be the first to react and review the
Space Requirement on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Weight
What is the printer’s weight?
21.6
lbs
1Votes
15.21
lbs
0Votes
vs
Weight
At 21.6 lbs, Sovol SV01 Pro is heavier than Creality Ender-3's 15.21 lbs. The lighter Ender-3 may be easier to reposition or move, making it better suited for users who value portability.
Net weight of the printer.
In the battle of Weight,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
6.4 lbs
measurement.
Based on community votes for Weight,
Sovol SV01 Pro ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
Both Sovol SV01 Pro and Creality Ender-3 support a power supply voltage range of 100-240 Volts, ensuring compatibility with global electrical standards and ease of use internationally.
Voltage input supported by the printer’s power supply.
In the battle of Power Supply Voltage,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Voltage on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
The idle power consumption of the printer is 15 Watts. This is the amount of electricity the printer uses when it is powered on but not actively printing.
Power drawn while the printer is on but not printing.
In the battle of Idle Power Consumption,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
15.00 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Idle Power Consumption on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
0
Creality Ender-3
0Votes
20-80%
vs
Storage Humidity Range
Sovol SV01 Pro does not provide storage humidity range information, while Creality Ender-3 supports 20-80% storage humidity. This could mean better environmental tolerance for stored Ender-3 units.
Safe humidity range for storing the printer.
Don’t keep it to yourself — be the first to react and review the
Storage Humidity Range on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Operating Temperature Range
What is the operating temperature range?
0
Sovol SV01 Pro
0Votes
41-113°F
0
Creality Ender-3
0Votes
59-86°F
Creality Ender-3
The optimal operating temperature range for the printer is 59-86°F (15-30°C). Maintaining this environment helps ensure stable print quality and prevents thermal issues.
Recommended ambient temperature range for safe operation.
In the battle of Operating Temperature Range,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Temperature Range on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Storage Temperature Range
What is the storage temperature range?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
0
Creality Ender-3
0Votes
32-104°F
Creality Ender-3
The recommended storage temperature range for the printer is 32-104°F (0-40°C). Storing the printer within this range helps prevent damage to sensitive components and filament materials.
Safe temperature range for storing the printer when not in use.
Don’t keep it to yourself — be the first to react and review the
Storage Temperature Range on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Power Consumption
What is the power consumption?
350
Watt
0Votes
270
Watt
0Votes
vs
Power Consumption
Regarding power consumption, Sovol SV01 Pro uses 350 Watts, while Creality Ender-3 consumes 270 Watts. Sovol's higher wattage indicates greater energy usage, which might impact operating costs over time.
Average power usage during active printing.
In the battle of Power Consumption,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
80.0 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Power Consumption on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Operating Humidity Range
What is the operating humidity range?
0
Sovol SV01 Pro
0Votes
20-80%
0
Creality Ender-3
0Votes
20-80%
vs
Operating Humidity Range
Both printers operate within the same humidity range of 20-80%, making them equally suitable for typical indoor environments and minimizing risks related to moisture during printing.
Acceptable humidity range during printer operation.
In the battle of Operating Humidity Range,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Humidity Range on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Power Supply Type
What type of power supply does it use?
0
Sovol SV01 Pro
0Votes
Internal
0
Creality Ender-3
0Votes
External
vs
Power Supply Type
Sovol SV01 Pro includes an internal power supply, whereas Creality Ender-3 has an external power supply. Internal power supplies can make the printer setup tidier, while external supplies may aid in easier replacement.
Indicates whether the printer uses an internal or external power supply.
In the battle of Power Supply Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Energy Saving Mode
Does it have energy saving mode?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Whether the printer includes an energy-saving or eco mode.
In the battle of Energy Saving Mode,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Energy Saving Mode on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
The build width of Sovol SV01 Pro is 11.02 inches versus Creality Ender-3's 8.6 inches, indicating Sovol allows printing wider parts, making it preferable for larger prototyping projects.
Maximum printable width of the build area.
In the battle of Build Width,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
2.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Width on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Sovol SV01 Pro has a minimum layer resolution of 100 microns, while Creality Ender-3 achieves finer details at 50 microns. Ender-3 thus offers better precision and smoother surface finish for detailed prints.
Finest layer height achievable.
In the battle of Layer Resolution Minimum,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
50.0 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Minimum on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
The Sovol SV01 Pro offers a build volume of 1230.45 cubic inches, significantly exceeding the Creality Ender-3's 738.4 cubic inches. This advantage suits users requiring larger print sizes.
total printable volume capacity.
In the battle of Build Volume,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
492.1 cubic in
measurement.
Based on community votes for Build Volume,
Sovol SV01 Pro ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
I like the Sovol SV01 Pro since it offers a bigger build volume which is great for larger projects.
See more
Min Extruder Temperature
What is the min extruder temperature?
32
°F
0Votes
356
°F
0Votes
Sovol SV01 Pro
Minimum extruder temperature is 32 °F, which converts to 0 °C, allowing printing of many common thermoplastics.
Creality Ender-3
The minimum extruder temperature is 356°F (180°C). This temperature is crucial for ensuring proper filament melting and extrusion, especially for lower-temperature materials like PLA.
Lowest operable extruder temperature.
In the battle of Min Extruder Temperature,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
324.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Min Extruder Temperature on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Max Bed Temperature
What is the max bed temperature?
230
°F
0Votes
212
°F
0Votes
Sovol SV01 Pro
Maximum bed temperature is 230 °F, equal to approximately 110 °C, sufficient for many engineering plastics.
Creality Ender-3
The maximum bed temperature is 212°F (100°C). A higher bed temperature helps with print adhesion and reduces warping, particularly for materials like ABS.
Maximum heated bed temperature.
In the battle of Max Bed Temperature,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
18.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Bed Temperature on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Number of Extruders
How many extruders does the printer have?
0
Sovol SV01 Pro
0Votes
1
0
Creality Ender-3
0Votes
1
Sovol SV01 Pro
This printer is equipped with a single extruder, suitable for standard single-material printing tasks.
Creality Ender-3
The printer is equipped with 1 extruder. This configuration is standard for single-color or single-material prints.
total extruders installed.
In the battle of Number of Extruders,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Number of Extruders on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Layer Resolution Maximum
What is the maximum layer resolution?
400
microns
0Votes
400
microns
0Votes
vs
Layer Resolution Maximum
Both printers share the same maximum layer resolution of 400 microns, providing flexibility for faster, coarser prints when high detail is not required.
Thickest layer height achievable.
In the battle of Layer Resolution Maximum,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
400.00 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Maximum on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Standard Nozzle Diameter
What is the standard nozzle diameter?
0.4
mm
0Votes
0.4
mm
0Votes
Sovol SV01 Pro
Standard nozzle diameter is 0.4 mm, the most common size for general use and balanced detail-speed.
Default nozzle diameter provided.
In the battle of Standard Nozzle Diameter,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
0.40 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Standard Nozzle Diameter on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Optional Nozzle Sizes
What optional nozzle sizes are supported?
0
Sovol SV01 Pro
0Votes
0.2mm, 0.25mm, 0.3mm, 0.4mm, 1.0mm
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Sovol SV01 Pro
Optional nozzle sizes range from 0.2mm up to 1.0mm, offering versatility for detailed or fast prints.
Alternative nozzle sizes supported.
Don’t keep it to yourself — be the first to react and review the
Optional Nozzle Sizes on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Diameter Supported
What filament diameter is supported?
1.75
mm
0Votes
1.75
mm
0Votes
Sovol SV01 Pro
Supports a filament diameter of 1.75 mm, which is a common standard offering a wide range of filament choices.
The filament size compatible with printer.
In the battle of Filament Diameter Supported,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Filament Diameter Supported on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Hotend Replaceable
Is the hotend replaceable?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
A replaceable hotend allows users to swap out the nozzle assembly, facilitating maintenance and upgrades.
Whether the hotend can be replaced.
In the battle of Hotend Replaceable,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Hotend Replaceable on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Extruder Drive Type
What type of extruder drive does it use?
0
Sovol SV01 Pro
0Votes
Direct Drive
0
Creality Ender-3
0Votes
Bowden
Sovol SV01 Pro
The extruder drive type is direct drive, which improves flexible filament handling and retraction performance.
The type of filament feeding system.
In the battle of Extruder Drive Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Drive Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Build Height
What is the build height?
11.81
inch
0Votes
9.8
inch
0Votes
Maximum printable height of the build area.
In the battle of Build Height,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
2.0 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Height on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Max Extruder Temperature
What is the max extruder temperature?
500
°F
0Votes
491
°F
0Votes
Maximum heating capability of extruder.
In the battle of Max Extruder Temperature,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
9.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Extruder Temperature on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Bed Temperature Gradient
What is the bed temperature gradient?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Variance in heat across the bed surface.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Gradient on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Heated Chamber
Does the printer have a heated chamber?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Whether the printer has a heated build chamber.
In the battle of Heated Chamber,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Heated Chamber on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Temperature Control Range
What is the chamber temperature control range?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Range of temperatures the printer chamber can maintain
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Control Range on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Dual Extruders
Does it support dual extruders?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Indicates if printer can run dual extruders.
In the battle of Dual Extruders,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Dual Extruders on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Independent Dual Extruder
Does it have IDEX support?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Whether the printer supports independent extruder heads.
In the battle of Independent Dual Extruder,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Independent Dual Extruder on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Quick-Swap Nozzles
Does it have quick-swap nozzles?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Nozzles can be quickly swapped without tools.
In the battle of Quick-Swap Nozzles,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Quick-Swap Nozzles on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Sovol SV01 Pro specifies no support for biocompatible materials, while Creality Ender-3 data on this is unavailable, implying neither printer is targeted for medical or dental biocompatible applications.
Supports resins/filaments approved for medical or dental use.
In the battle of Biocompatible Materials Support,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Biocompatible Materials Support on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Maximum amount of resin the tank can hold.
Don’t keep it to yourself — be the first to react and review the
Max Resin Tank Capacity on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Supported filament types include common materials like PLA, ABS, PETG, and TPU, covering most consumer needs.
Filament materials that the printer can process.
In the battle of Supported Filament Types,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Filament Types on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Max Supported Filament Diameter
What is the maximum supported filament diameter?
1.75
mm
0Votes
1.75
mm
0Votes
Sovol SV01 Pro
Maximum supported filament diameter is 1.75 mm, matching its supported filament diameter.
Maximum filament diameter that can be used.
In the battle of Max Supported Filament Diameter,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Supported Filament Diameter on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Auto-Loading
Does it have filament auto-loading?
Yes
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
vs
Filament Auto-Loading
Sovol SV01 Pro features filament auto-loading for user convenience, while Creality Ender-3 does not provide this feature. This gives Sovol an edge in ease of use for filament management.
Automatic feeding of filament into extruder.
In the battle of Filament Auto-Loading,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Auto-Loading on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Drying Required
Is filament drying required?
Yes
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Sovol SV01 Pro
Filament drying is required to prevent moisture-induced print defects, ensuring filament quality.
Whether drying filament before use is necessary.
In the battle of Filament Drying Required,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Drying Required on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Third-Party Material,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Third-Party Material on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Dry Box
Does it support filament dry boxes?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Supports use of a dry box to prevent filament moisture issues.
In the battle of Filament Dry Box,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Dry Box on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Multi-Material Printing
Can it print with multiple materials?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Ability to print with multiple materials simultaneously.
Don’t keep it to yourself — be the first to react and review the
Multi-Material Printing on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Max Number of Materials Supported
What is the maximum number of materials supported?
0
Sovol SV01 Pro
0Votes
1
0
Creality Ender-3
0Votes
1
Maximum distinct materials supported in one job.
In the battle of Max Number of Materials Supported,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Max Number of Materials Supported on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Supported Resin Types
What resin types are supported?
0
Sovol SV01 Pro
0Votes
None
0
Creality Ender-3
0Votes
None
Resin types that the printer can use.
In the battle of Supported Resin Types,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Resin Types on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Compatible Resin Wavelength
What resin wavelength is compatible?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Light wavelength compatibility for curing resins.
Don’t keep it to yourself — be the first to react and review the
Compatible Resin Wavelength on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Auto-Fill
Does it have resin auto-fill?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
vs
Resin Auto-Fill
Neither Sovol SV01 Pro nor Creality Ender-3 support resin auto-fill, highlighting their focus on filament-based printing rather than resin workflows.
Automatic filling of resin during prints.
Don’t keep it to yourself — be the first to react and review the
Resin Auto-Fill on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
The official maximum print speed is 180 mm/s for Creality Ender-3, significantly faster than Sovol SV01 Pro’s 80 mm/s, making Ender-3 the better choice for users seeking speed.
Manufacturer-claimed maximum print speed.
In the battle of Official Max Print Speed,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
100.0 mm/s
measurement.
Based on community votes for Official Max Print Speed,
Sovol SV01 Pro ◉ earned
0 votes,
less than
Creality Ender-3 ◉,
which got 1 votes.
Sovol SV01 Pro operates at an idle noise level of 30 dB, much quieter than Creality Ender-3’s 50 dB. The Sovol is more suitable for noise-sensitive environments or home use.
Measures the noise when printer is on but not printing; lower is better.
In the battle of Idle Noise Level,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
20.0 dB
measurement.
Based on community votes for Idle Noise Level,
Sovol SV01 Pro ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
The SV01 Pro is quieter with only 30 dB idle noise which is nice for home printing.
See more
Print Accuracy
What is the print accuracy?
100
microns
1Votes
100
microns
0Votes
vs
Print Accuracy
Both Sovol SV01 Pro and Creality Ender-3 offer the same print accuracy of 100 microns, ensuring comparable precision and print quality between the two models.
Degree of dimensional accuracy of printed parts.
In the battle of Print Accuracy,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
100.00 microns
measurement.
Based on community votes for Print Accuracy,
Sovol SV01 Pro ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
Print accuracy is the same for both but SV01 has better layer control minimum which is pretty neat.
See more
Time to Print Benchy
How long does it take to print a Benchy?
85
minutes
0Votes
90
minutes
0Votes
vs
Time to Print Benchy
Time to print the Benchy model is slightly faster on Sovol SV01 Pro at 85 minutes compared to Creality Ender-3’s 90 minutes, benefiting users valuing quicker benchmark prints.
Average time to complete the benchmark “Benchy” model.
In the battle of Time to Print Benchy,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
5.0 minutes
measurement.
Don’t keep it to yourself — be the first to react and review the
Time to Print Benchy on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Bridging Performance
What is the bridging performance?
10
mm
0Votes
50
mm
0Votes
Sovol SV01 Pro
Bridging performance of 10 mm means the printer can successfully print unsupported spans up to this length without significant sagging.
Creality Ender-3
The bridging performance is 50 mm. This indicates the printer's ability to span a 50 mm horizontal gap in a print without requiring support structures beneath it.
Longest unsupported horizontal span printed without sagging.
In the battle of Bridging Performance,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
40.0 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Bridging Performance on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Measured Effective Print Speed
What is the effective measured print speed?
50
mm/s
0Votes
60
mm/s
0Votes
vs
Measured Effective Print Speed
Creality Ender-3 has a higher measured effective print speed of 60 mm/s compared to Sovol SV01 Pro's 50 mm/s, making Ender-3 faster for standard printing tasks.
Independently measured real-world print speed.
In the battle of Measured Effective Print Speed,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
10.0 mm/s
measurement.
Don’t keep it to yourself — be the first to react and review the
Measured Effective Print Speed on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
First Layer Calibration
How is the first layer calibrated?
0
Sovol SV01 Pro
0Votes
Auto
0
Creality Ender-3
0Votes
Manual
Sovol SV01 Pro
First layer calibration is automatic, simplifying the setup process and improving first-layer adhesion.
Method used for first-layer bed calibration.
In the battle of First Layer Calibration,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
First Layer Calibration on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Print Adhesion Type
What type of print adhesion is used?
0
Sovol SV01 Pro
0Votes
Glass
0
Creality Ender-3
0Votes
Other
Sovol SV01 Pro
Print adhesion utilizes a glass build plate, which offers a smooth surface and good adhesion after proper preparation.
Method used to secure prints to the bed.
In the battle of Print Adhesion Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Adhesion Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Print Recovery
Does the printer support print recovery?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Creality Ender-3
The print recovery feature enables the printer to resume a print job from where it left off after an unexpected interruption, such as a power outage. This helps prevent print failures and saves material.
Ability to resume print after power loss or interruption.
In the battle of Print Recovery,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Recovery on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Continuous Print Time
What is the max continuous print time?
200
hours
0Votes
72
hours
0Votes
Sovol SV01 Pro
The printer supports continuous print times of up to 200 hours, making it suitable for long-duration projects.
Maximum supported printing time without interruption.
In the battle of Continuous Print Time,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
128.0 hours
measurement.
Don’t keep it to yourself — be the first to react and review the
Continuous Print Time on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Print Success Rate
What is the print success rate?
95
%
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Sovol SV01 Pro
A print success rate of 95% reflects a reliable printing process with minimal failures.
Percentage of prints successfully completed.
Don’t keep it to yourself — be the first to react and review the
Print Success Rate on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Operating Noise Level
What is the operating noise level?
45
dB
0Votes
50
dB
0Votes
Creality Ender-3
The operating noise level is 50 dB. This noise level is comparable to a quiet office environment, making it suitable for use in various settings without significant disturbance.
Measures the sound generated during printing; lower is quieter.
In the battle of Operating Noise Level,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
5.0 dB
measurement.
Don’t keep it to yourself — be the first to react and review the
Operating Noise Level on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Print Quality Rating
What is the print quality rating?
0
Sovol SV01 Pro
0Votes
8
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Sovol SV01 Pro
Print quality rating is 8 on a scale where 10 indicates the highest detailed output, reflecting good print accuracy.
Rated score for overall print quality (0–10).
Don’t keep it to yourself — be the first to react and review the
Print Quality Rating on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Overhang Performance
What is the overhang performance?
55
degrees
0Votes
45
degrees
0Votes
Maximum angle of unsupported overhangs achievable.
In the battle of Overhang Performance,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
10.0 degrees
measurement.
Don’t keep it to yourself — be the first to react and review the
Overhang Performance on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Spaghetti/Fault Detection
Does it have spaghetti or fault detection?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Detects failed prints or filament tangles.
In the battle of Spaghetti/Fault Detection,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Spaghetti/Fault Detection on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
The enclosure type is open, meaning the build area is exposed during printing.
Creality Ender-3
The printer features an Open enclosure design. Open enclosures are common for FDM printers and are suitable for materials like PLA, but may require external ventilation for filaments prone to warping or emitting fumes.
Whether the printer has an open or enclosed build chamber.
In the battle of Enclosure,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Neither offers air filtration which is a bit disappointing.
See more
Screen Size
What is the display screen size?
4.3
Inch
0Votes
2.8
Inch
0Votes
Sovol SV01 Pro
The screen size is 4.3 inches, equal to about 10.92 cm diagonally.
Creality Ender-3
The screen resolution refers to a display size of 2.8 Inches (7.1 cm). This typically indicates the diagonal measurement of the printer's user interface screen.
Size of the display screen.
In the battle of Screen Size,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
1.5 Inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Screen Size on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Build Plate Surface Texture
What is the build plate texture?
0
Sovol SV01 Pro
0Votes
Smooth
0
Creality Ender-3
0Votes
Textured
Sovol SV01 Pro
The build plate has a smooth surface texture to promote good adhesion and easy removal of prints.
Creality Ender-3
The build plate features a Textured surface. This type of surface often improves print adhesion and can leave a distinct matte finish on the bottom of printed objects.
Surface finish of the build plate.
In the battle of Build Plate Surface Texture,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Surface Texture on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Build Plate Removable
Is the build plate removable?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
The build plate is removable, which helps with print removal and maintenance.
Creality Ender-3
The build plate is removable, which significantly simplifies the process of detaching finished prints. This also makes cleaning and preparing the bed for the next job more convenient.
Whether the build plate can be detached for print removal.
In the battle of Build Plate Removable,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Removable on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Motion System
What is the motion system?
0
Sovol SV01 Pro
0Votes
Belts, Rods
0
Creality Ender-3
0Votes
Belts, Rods
Sovol SV01 Pro
The motion system uses belts and rods, which are standard for Cartesian printers balancing cost and precision.
Creality Ender-3
The printer utilizes a motion system based on Belts and Rods. This is a common setup for Cartesian FDM printers, providing precise movement of the print head across the build area.
Mechanical motion system guiding the print head.
In the battle of Motion System,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Motion System on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Touchscreen Display
Does it have a touchscreen display?
Yes
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Sovol SV01 Pro
It features a touchscreen display, enhancing user interaction and ease of use.
Indicates if a touchscreen is provided for controls.
In the battle of Touchscreen Display,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Touchscreen Display on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Screen Resolution
What is the display resolution?
0
Sovol SV01 Pro
0Votes
128x64p
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Sovol SV01 Pro
Screen resolution is 128x64 pixels, typical for status displays on printers of this class.
Resolution of the display screen.
Don’t keep it to yourself — be the first to react and review the
Screen Resolution on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Manual Bed Leveling
Does it support manual bed leveling?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
Manual bed leveling means users must adjust the print bed themselves to ensure proper adhesion and print quality.
Support for traditional manual bed leveling.
In the battle of Manual Bed Leveling,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Manual Bed Leveling on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Runout Sensor
Does it have a filament runout sensor?
Yes
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Sovol SV01 Pro
This printer includes a filament runout sensor to pause prints and avoid failed print jobs when filament runs out.
Detects when filament runs out and pauses printing.
In the battle of Filament Runout Sensor,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Runout Sensor on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Power Loss Recovery
Does it support power loss recovery?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
Power loss recovery ensures print jobs can resume after unexpected outages, reducing material waste and time loss.
Recovers print jobs after power interruptions.
In the battle of Power Loss Recovery,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Loss Recovery on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Frame Type
What is the frame type?
0
Sovol SV01 Pro
0Votes
Cartesian
0
Creality Ender-3
0Votes
Cartesian
Mechanical structure style of the printer.
In the battle of Frame Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Frame Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Built-in Camera
Does it have a built-in camera?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Camera for monitoring prints and creating time-lapses.
In the battle of Built-in Camera,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Built-in Camera on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Lighting Inside Chamber
Does it have chamber lighting?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Chamber lighting to monitor prints in progress.
In the battle of Lighting Inside Chamber,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Lighting Inside Chamber on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Lighting Color Modes
What chamber lighting modes are available?
0
Sovol SV01 Pro
0Votes
None
0
Creality Ender-3
0Votes
None
Options for chamber lighting colors.
In the battle of Chamber Lighting Color Modes,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Lighting Color Modes on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Build Plate Type
What type of build plate does it have?
0
Sovol SV01 Pro
0Votes
Magnetic
0
Creality Ender-3
0Votes
Flex
Type of build surface material.
In the battle of Build Plate Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Bed Leveling
Does it support auto bed leveling?
Yes
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Automatic calibration of the print bed.
In the battle of Auto Bed Leveling,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Bed Leveling on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Cooling Fans
Does it have cooling fans?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Fans for cooling extruder and printed layers.
In the battle of Cooling Fans,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cooling Fans on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Vibration Compensation
Does it support vibration compensation?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Compensation system to reduce print artifacts.
In the battle of Vibration Compensation,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Compensation on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Toolhead Modularity
What modular toolheads are supported?
0
Sovol SV01 Pro
0Votes
Laser
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Whether the toolhead can be swapped for other functions.
Don’t keep it to yourself — be the first to react and review the
Toolhead Modularity on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Connectivity & Software
13
Supported Slicers
Which slicers are supported?
0
Sovol SV01 Pro
0Votes
Cura, Repetier, Simplify3D
Compatible slicer software includes Cura, Repetier, and Simplify3D, providing a choice for slicing preferences.
Creality Ender-3
The printer is compatible with popular slicing software such as Cura, PrusaSlicer, Simplify3D, Creality Print, and Orca Slicer. These programs translate 3D models into printable instructions (G-code).
Slicer programs that are compatible with the printer.
In the battle of Supported Slicers,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Slicers on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
File Transfer Method
What file transfer methods are supported?
0
Sovol SV01 Pro
0Votes
USB, TF Card
0
Creality Ender-3
0Votes
USB, SD Card
Sovol SV01 Pro
File transfer can be done via USB or TF Card, supporting flexible ways to load print jobs.
Methods available to transfer files to the printer.
In the battle of File Transfer Method,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
File Transfer Method on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Supports common 3D file formats such as STL, OBJ, AMF, and G-code for wide compatibility.
File types accepted for printing.
In the battle of Supported File Formats,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported File Formats on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Firmware Update
Does the printer support firmware updates?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
Firmware can be updated, allowing improvements and bug fixes to be applied to the printer.
Indicates whether the printer supports firmware updates; important for new features and bug fixes.
In the battle of Firmware Update,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Firmware Update on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Connectivity Options
What connectivity options are available?
0
Sovol SV01 Pro
0Votes
USB, TF Card
0
Creality Ender-3
0Votes
USB, SD Card
Available connection types for file transfer and control.
In the battle of Connectivity Options,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Connectivity Options on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Monitoring
Does it support remote monitoring?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Ability to monitor prints remotely via app or web.
In the battle of Remote Monitoring,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Monitoring on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Cloud-Based Software
Does it support cloud-based software?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Indicates whether the printer uses or supports cloud software.
In the battle of Cloud-Based Software,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud-Based Software on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Proprietary Software Required
Is proprietary software required?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Whether use of manufacturer’s software is mandatory.
In the battle of Proprietary Software Required,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Proprietary Software Required on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Mobile App
Does it support a mobile app?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Ability to use a mobile app for control/monitoring.
In the battle of Mobile App,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Mobile App on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
API/SDK Integration
Does it support API/SDK integration?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Allows developers to integrate with APIs or SDKs.
In the battle of API/SDK Integration,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
API/SDK Integration on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Multi-Printer Fleet Control,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-Printer Fleet Control on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Time-Lapse Recording
Does it support time-lapse recording?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Ability to capture time-lapse videos of prints.
In the battle of Time-Lapse Recording,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Time-Lapse Recording on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Firmware Update
Does it support remote firmware updates?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Supports updating firmware remotely.
In the battle of Remote Firmware Update,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Firmware Update on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Post-processing equipment compatibility implies that this printer supports workflows involving additional finishing equipment.
Whether the printer supports integration with wash/cure stations.
In the battle of Post-Processing Equipment Compatibility,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Post-Processing Equipment Compatibility on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Type of UV light source used to cure resin layers.
In the battle of UV Light Source Type,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
UV Light Source Type on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Approximate number of prints before resin tank replacement.
Don’t keep it to yourself — be the first to react and review the
Resin Tank Lifetime on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
UV Power Output
What is the UV power output?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Strength of UV light exposure affecting curing speed and accuracy.
Don’t keep it to yourself — be the first to react and review the
UV Power Output on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Layer Curing Speed
What is the resin layer curing speed?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Time required to cure one resin layer.
Don’t keep it to yourself — be the first to react and review the
Resin Layer Curing Speed on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Cartridge System
Does it use a resin cartridge system?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Whether it uses a sealed resin cartridge system for easy handling.
Don’t keep it to yourself — be the first to react and review the
Resin Cartridge System on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Resin Mixing
Does it have auto resin mixing?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Whether resin is automatically mixed during operation for consistency.
Don’t keep it to yourself — be the first to react and review the
Auto Resin Mixing on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Heating System
Does it have a resin heating system?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Whether the printer can heat resin for optimal viscosity.
Don’t keep it to yourself — be the first to react and review the
Resin Heating System on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Wash Time
What is the wash time?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Typical duration to wash prints in post-processing.
Don’t keep it to yourself — be the first to react and review the
Wash Time on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Cure Time
What is the cure time?
Who knows?
0Votes
Sovol SV01 Pro
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Typical duration to fully cure resin prints after washing.
Don’t keep it to yourself — be the first to react and review the
Cure Time on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
This device has the CE certification, indicating compliance with European safety standards among other certifications like UL, FCC, and RoHS.
Creality Ender-3
The printer holds CE, FCC, and RoHS safety certifications. These ensure compliance with European health and safety, US electromagnetic compatibility, and restrictions on hazardous substances.
Official safety standards the printer complies with.
In the battle of Safety Certifications,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Safety Certifications on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Equipped with 1 safety sensor to help protect the user and the printer during operation.
Number of safety sensors installed in the printer.
Don’t keep it to yourself — be the first to react and review the
Safety Sensors Count on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
A setting that prevents unauthorized or unsafe use by children.
In the battle of Child Lock Mode,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Child Lock Mode on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Overheat Protection
Does it feature overheat protection?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Sovol SV01 Pro
Overheat protection helps prevent damage by shutting down or reducing temperature if the printer overheats.
Shuts down printer when components exceed safe temps.
In the battle of Overheat Protection,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Overheat Protection on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Emergency Stop Button
Does it have an emergency stop button?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Dedicated button to stop the printer instantly in emergencies.
In the battle of Emergency Stop Button,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Emergency Stop Button on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Fireproof Build Plate
Does it have a fireproof build plate?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Build plate is resistant to fire for extra safety.
In the battle of Fireproof Build Plate,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Fireproof Build Plate on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Shutdown on Error
Does it auto shut down on errors?
Yes
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Shuts printer down automatically when critical errors occur.
In the battle of Auto Shutdown on Error,
Sovol SV01 Pro ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Shutdown on Error on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Spill Protection
Does it have resin spill protection?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Prevents or contains resin leaks in resin printers.
Don’t keep it to yourself — be the first to react and review the
Resin Spill Protection on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Air Quality Compliance
Is it compliant with air quality standards?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Meets air quality standards for emissions and filtration.
In the battle of Air Quality Compliance,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Quality Compliance on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
0
Creality Ender-3
1Votes
Multi-Material, Laser, CNC, Enclosure, Camera
Sovol SV01 Pro
Upgrade options include adding a laser and an enclosure, allowing users to customize capabilities.
Creality Ender-3
The printer supports various Upgrade Options to enhance its capabilities, including Multi-Material printing systems, Laser engraving modules, CNC milling attachments, an Enclosure, and a Camera for monitoring.
Supported upgrade kits and modules for expanding functionality.
In the battle of Upgrade Options,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Based on community votes for Upgrade Options,
Sovol SV01 Pro ◉ earned
0 votes,
less than
Creality Ender-3 ◉,
which got 1 votes.
Supported modification kits include laser and enclosure, allowing for expansion of printer capabilities.
Officially supported modification kits.
In the battle of Supported Mod Kits,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Mod Kits on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Service Interval
What is the service interval?
200
hours
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Sovol SV01 Pro
Recommended service interval is every 200 hours of operation to maintain optimal performance.
Recommended time between major servicing.
Don’t keep it to yourself — be the first to react and review the
Service Interval on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Lubrication Required
Does it require lubrication?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Creality Ender-3
Regular lubrication is required to maintain the printer's moving parts. This ensures smooth, reliable operation and extends the lifespan of the mechanical components.
Indicates if lubrication is needed for smooth operation.
In the battle of Lubrication Required,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Lubrication Required on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Spare Parts Availability
Are spare parts available?
No
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Whether spare parts are readily available for purchase.
In the battle of Spare Parts Availability,
Sovol SV01 Pro ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Spare Parts Availability on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Self-Diagnostics
Does it have self-diagnostics?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Printer can analyze itself for common faults and errors.
In the battle of Self-Diagnostics,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Self-Diagnostics on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Maintenance Reminders
Does it provide maintenance reminders?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Automated alerts to schedule maintenance tasks.
In the battle of Maintenance Reminders,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Maintenance Reminders on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Maintenance Alerts
Does it feature predictive maintenance alerts?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Predicts potential failures and alerts the user before issues arise.
In the battle of Predictive Maintenance Alerts,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Maintenance Alerts on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Tool-Free Maintenance
Is tool-free maintenance supported?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Allows key maintenance tasks without tools.
In the battle of Tool-Free Maintenance,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Tool-Free Maintenance on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Business & Professional Features
10
Print Farm Management
Does it support print farm management?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Indicates if multiple printers can be networked and managed as a farm.
In the battle of Print Farm Management,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Farm Management on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Cloud Fleet Management
Does it support cloud fleet management?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Ability to manage multiple devices remotely via cloud software.
In the battle of Cloud Fleet Management,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud Fleet Management on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Workflow Integration
Does it integrate with workflows?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Integration with professional workflow tools and design platforms.
In the battle of Workflow Integration,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Workflow Integration on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Multi-User Profiles
Does it support multi-user profiles?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Allows multiple users to have distinct profiles and permissions.
In the battle of Multi-User Profiles,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-User Profiles on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Access Control
Does it support remote access control?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Ability to control printer access remotely with permissions.
In the battle of Remote Access Control,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Access Control on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Enterprise Security Features
Does it have enterprise security features?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Advanced security measures like encryption, secure login, and permissions.
In the battle of Enterprise Security Features,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enterprise Security Features on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Licensing Options
Are licensing options available?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Availability of enterprise licensing for organizations.
In the battle of Licensing Options,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Licensing Options on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Usage Analytics Dashboard
Does it include a usage analytics dashboard?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Provides usage statistics and analytics for tracking productivity and costs.
In the battle of Usage Analytics Dashboard,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Usage Analytics Dashboard on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
SLA & Support Contracts
Are SLA or support contracts available?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Option for service-level agreements and premium support contracts.
In the battle of SLA & Support Contracts,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
SLA & Support Contracts on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Cost Estimation
Does it have predictive cost estimation?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Estimates printing costs (material, power, time) before job start.
In the battle of Predictive Cost Estimation,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Cost Estimation on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Enterprise Monitoring & Sensors
10
Sensor Count
How many sensors are included?
0
Sovol SV01 Pro
0Votes
3
0
Creality Ender-3
0Votes
5
Creality Ender-3
The printer incorporates 5 sensors. These sensors monitor various parameters throughout the printing process, contributing to enhanced safety and operational efficiency.
total number of sensors installed in the printer.
In the battle of Sensor Count,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Sensor Count on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Vibration Sensor
Does it include a vibration sensor?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Detects vibrations and compensates for print accuracy.
In the battle of Vibration Sensor,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Sensor on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Print Log Storage
Does it have print log storage?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Records print job history and diagnostic data.
In the battle of Print Log Storage,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Log Storage on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Error Alerts
Does it provide remote error alerts?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Sends error notifications to remote devices.
In the battle of Remote Error Alerts,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Error Alerts on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Failure Logs
Does it support predictive failure logs?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Tracks and predicts potential failures before they occur.
In the battle of Predictive Failure Logs,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Failure Logs on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Calibration History Log
Does it have a calibration history log?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Stores history of calibration for quality control.
In the battle of Calibration History Log,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Calibration History Log on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Bed Temperature Sensors
Does it have bed temperature sensors?
Yes
0Votes
Sovol SV01 Pro
Yes
0Votes
Creality Ender-3
Detects and regulates the build plate temperature.
In the battle of Bed Temperature Sensors,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Sensors on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Temperature Sensors
Does it have chamber temperature sensors?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Tracks and maintains chamber temperature for consistent prints.
In the battle of Chamber Temperature Sensors,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Sensors on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Jam Detection
Does it support filament jam detection?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Detects blockages or jams in the filament path.
In the battle of Filament Jam Detection,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Jam Detection on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Extruder Pressure Sensor
Does it have an extruder pressure sensor?
No
0Votes
Sovol SV01 Pro
No
0Votes
Creality Ender-3
Monitors extrusion pressure to prevent under- or over-extrusion.
In the battle of Extruder Pressure Sensor,
Sovol SV01 Pro ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Pressure Sensor on Sovol SV01 Pro ◉
vs Creality Ender-3 ◉ and help others decide!
Surveys
Because hot takes deserve votes.
Printing Speed
How would you rate the printing speed of this 3D printer?
Lightning fast — Under 2 hours
0Votes
0Votes
Very fast — 2 to 5 hours
0Votes
0Votes
Fast — 5 to 10 hours
0Votes
0Votes
Moderate speed — 10 to 20 hours
0Votes
0Votes
Very slow — Over 20 hours
0Votes
0Votes
Print Quality and Detail
How would you describe the print quality and level of detail produced by this 3D printer?
Ultra fine detail — Layer height below 0.05 mm
0Votes
0Votes
Fine detail — Layer height 0.05 to 0.1 mm
0Votes
0Votes
Good detail — Layer height 0.1 to 0.2 mm
0Votes
0Votes
Decent detail — Layer height 0.2 to 0.3 mm
0Votes
0Votes
Rough and basic — Layer height above 0.3 mm
0Votes
0Votes
Build Volume Capacity
How do you find the build volume capacity of this 3D printer?
Extra large projects — Over 400 mm each side
0Votes
0Votes
Large projects — 300 to 400 mm each side
0Votes
0Votes
Medium projects — 200 to 300 mm each side
0Votes
0Votes
Small projects — 150 to 200 mm each side
0Votes
0Votes
Tiny prints only — Under 150 x 150 x 150 mm
0Votes
0Votes
Material Consumption Efficiency
How efficient is this 3D printer in using filament or resin materials?
Very efficient — Under 50 grams per model
0Votes
0Votes
Efficient — 50 to 70 grams per model
0Votes
0Votes
Decent efficiency — 70 to 100 grams per model
0Votes
0Votes
Average efficiency — 100 to 150 grams per model
0Votes
0Votes
Wasteful — Over 150 grams per model
0Votes
0Votes
Noise Level
How noisy is this 3D printer during operation?
Whisper quiet
0Votes
0Votes
Quiet most of the time
0Votes
0Votes
Manageable with background noise
0Votes
0Votes
Noticeable but tolerable
0Votes
0Votes
Loud and distracting
0Votes
0Votes
Durability and Lifespan
How durable does this 3D printer seem in terms of lifespan?
Very durable — Over 5 years
0Votes
0Votes
Long lasting — 3 to 5 years
0Votes
0Votes
Decent lifespan — 2 to 3 years
0Votes
0Votes
Short lifespan — 1 to 2 years
0Votes
0Votes
Breaks down quickly — Under 1 year
0Votes
0Votes
Performance
How would you rate the overall performance of this 3D printer in terms of print quality and reliability?
Excellent — Consistently produces high-quality prints with no issues
0Votes
0Votes
Good — Produces quality prints with minor inconsistencies
0Votes
0Votes
Average — Prints are acceptable with occasional issues
0Votes
0Votes
Below average — Frequent print failures or inconsistencies
0Votes
0Votes
Poor — Often fails to produce quality prints
0Votes
0Votes
Ease of Setup
How easy was the setup process for this 3D printer?
Very easy — The printer was simple to set up with clear instructions and minimal effort
0Votes
0Votes
Easy — Setup was straightforward, with only a few minor adjustments needed
0Votes
0Votes
Average — Setup was manageable but took time and required some troubleshooting
0Votes
0Votes
Challenging — Setup was difficult and required assistance from support or additional resources
0Votes
0Votes
Very difficult — Setup was complicated, with unclear instructions and many issues during the process
0Votes
0Votes
Pricing
How would you rate the pricing for this 3D printer?
Great value for money — Offers excellent features and performance at an affordable price
0Votes
0Votes
Pretty good price — Decent pricing for the features, a reasonable value
0Votes
0Votes
Fair deal — The price is acceptable but might be slightly high for the features offered
0Votes
0Votes
Kinda pricey — The price feels a bit high compared to similar models
0Votes
0Votes
Crazy expensive — The price is significantly higher than other options with similar features
0Votes
0Votes
Design Appeal
How would you rate the design appeal of this 3D printer?
Excellent — Sleek, modern design that looks great in any workspace
0Votes
0Votes
Good — Attractive and functional design that fits well in most environments
0Votes
0Votes
Average — Standard design with no particular standout features
0Votes
0Votes
Fair — Design feels bulky or outdated, but still serves its purpose
0Votes
0Votes
Poor — Unattractive design, clunky and may be an eyesore in most spaces
Recaptor
0
Cartling
